Make your own free website on
Metal lightsabers

      Metal lightsabers are more expensive to make than PVC, but they look much better, and cost more. For those who have to show off a good-looking saber, but aren't willing to spend too much to get one, these are for you.
      Now you can request gold PVC parts on your saber! Just mention in your order the color scheme you would like. Any of the pieces except for the foam grips and the metal itself can be painted black, silver or gold. Just let us know, there's no extra cost for personalization!
     Site update: Sabers with blades are now being offered! Sabers of all colors are available, red, orange, yellow, green, blue, and purple.
     The blades are made of 3/4 inch PVC, which is strong durable plastic. It is much lighter than wood, and give a much better illusion of a weightless blade. Most sabers with blades are between 3 1/2 to 4 feet long, the child sized Model 6 metal lightsaber is much shorter than that, about 2 1/2 feet long.
     Also, as an added incentive to buy the metal sabers, Cheapsabers will also throw in a free belt loop or hook on any metal sabers for free. (Except the type 1 and 2, a belt loop will work on them, but not a belt hook.) Pictures of the belt loop and hook can be seen here. The loop is a silver colored D-ring attached to a metal plate, and the hook is the gold colored hook that can be screwed into the bottom of the saber.

Here you see the model 1 chrome lightsaber. It is not battle-ready, unfortunately. But it is affordable, and it looks good. It has two activator buttons, one near the tip, and one halfway down the hilt. This would allow the bearer to hold it without accidentally turning it on when just one of the buttons is pressed.
It is long, almost 13 inches, but fairly thin, only 1.5 inches wide.
Click here to see more pictures, click below to add to shopping cart for 40 dollars. Make sure to email me at to specify red or blue buttons.

This is the model 2 chrome double-sided lightsaber. It can be easily made battle ready. It is about 24 inches long from tip to tip, and it has two activator buttons in the middle. It is made of chrome-plated metal, with PVC and foam grips, and black PVC emitters.
Click here to see more pictures. Click below to add to the shopping cart for 40 dollars. Make sure to email me at to specify red or blue buttons. If you are ordering a blade with the saber, make sure to specify blade color.
Add saber hilt to cart for 40 dollars.
Add saber with blades for 55 dollars
Metal Sabers page 2
Metal Sabers page 3
Back to Main
Onward to the PVC sabers
Chainmail armor section
Other props
Order form
About this site
Mass order info
Saber kits
Custom sabers
Saber construction FAQ